SMT divergence, explained

ES and NQ usually move together. When one of them takes out a high and the other refuses to follow, that crack is what ICT calls SMT divergence. It's a reason to trust a turn, not a signal on its own.

IN ONE LINESMT divergence: one market makes a new high (or low) and its correlated partner does not.

6 short lessons · about 4 minutes

What you'll see · ES above, NQ below · 1-minuteIllustration
  • Bearish SMT: the line between the two highs
  • The earlier high (resting liquidity)
  • Macro window

Lesson 1 · Two markets, one picture

One makes a higher high, the other a lower high

Put ES and NQ on the same minutes. Compare each market's newest swing high with its earlier one. If they disagree, that's the divergence.

Bearish SMT, close upIllustration
High 1
An earlier swing high, at about the same time on both markets.
High 2
The newer swing high, again at about the same time on both.
The divergence
ES goes above its high 1, NQ stays below its own. One is strong, one isn't.

KEYCompare each market with itself, then compare the two answers. Different answers make an SMT.

Lesson 2 · Bullish and bearish

Highs that disagree are bearish, lows that disagree are bullish

It doesn't matter which market makes the new extreme. What matters is that they don't both do it.

Bearish SMT · at the highs

One market takes the high above, the other fails. Buying is weakening. ICT reads it as a sign price may turn down.

Bullish SMT · at the lows

One market takes the low below, the other holds above its own. Selling is weakening. ICT reads it as a sign price may turn up.

KEYBearish SMT forms at highs. Bullish SMT forms at lows.

Lesson 3 · SMT vs no SMT

If both make the new high, there's nothing to see

Two markets making the same move is normal. The signal is only in the mismatch.

They agreeNo SMT

Both take their high. The move is shared, so there's no divergence.

They disagreeBearish SMT

ES takes its high, NQ doesn't. One line up, one line down: that's the SMT.

KEYLines pointing the same way: no SMT. Lines pointing opposite ways: SMT.

Lesson 4 · What breaks it

A close beyond the newer high cancels it

A bearish SMT says the high is weak. If price then closes above that newer high, the idea didn't hold.

HoldsStill valid

Price never closes back above high 2. The divergence stands.

Closes aboveBroken

A candle closes above ES's newer high. The SMT is broken.

KEYA bearish SMT lives below its newer high. A bullish one lives above its newer low.

Lesson 5 · How to use it

Four steps, as a qualifier

  1. Watch both markets on the same timeframe

    ES and NQ, the same minutes side by side.

  2. Wait for one to take a high or low

    Often a swing, equal highs or a session high.

  3. Check the partner at the same moment

    Did it take its own level too? If not, mark the SMT.

  4. Use it to back a setup, not as the setup

    ICT pairs it with something else at that spot, like a CISD or a fair value gap.

Lesson 6 · Good to know

A few details that change the read

Pick markets that move together

The stock index futures (ES, NQ, YM, RTY) pair well. Gold and silver are another pair. Unrelated markets diverge all the time and mean nothing.

Same moment, not just same shape

The two highs should form within a few minutes of each other. Highs far apart in time aren't comparing the same move.

Timing adds weight

ICT gives more weight to an SMT that forms inside a macro window, when he says price reaches for liquidity.

In Omen Layers

Omen Layers checks your chart against a partner market and draws SMT divergence from its SMT module.

  • Pick the partner on the card (ES, NQ, YM, RTY and their micros; gold and silver for metals). Changing it reloads the chart.
  • It compares 1-minute swings: the Swing knob sets their size, Window how far back the earlier swing may be (30 minutes to start).
  • MACROS ONLY (on to start) keeps only divergences inside a macro; HIDE BROKEN hides one once a close goes beyond its newer swing.
  • Each SMT is a sloped line between the two swings, labeled SMT; the board shows today's newest, bullish or bearish, with its time.
See Omen Layers →
THE RECAP
  • SMT divergence: one market makes a new high or low and its partner doesn't.
  • Disagreeing highs are bearish; disagreeing lows are bullish.
  • Compare highs that form at about the same time on both markets.
  • It's a qualifier for another setup, and a close beyond the newer swing breaks it.
Education only · Not financial advice

Charts on this page are illustrations drawn for teaching. They are not real market data and do not show any product's output. ICT concepts are taught by Michael J. Huddleston; this page is an independent explanation.